Note: You cannot configure WPA-Enterprise and 802.1x using this wizard. For
information on configuring these modes, see Manually Configuring a Wireless
Network on page 199.
To configure a WLAN using the Wireless Configuration Wizard
1. Prepare the appliance for a wireless connection as described in Preparing the Edge Appliance
for a Wireless Connection on page 51.
2. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
3. In the WLAN network's row, click Edit.
The Edit Network Settings page appears.
4. Click Wireless Wizard.
The Wireless Configuration Wizard opens, with the Wireless Configuration dialog box displayed.
5. Select the Enable wireless networking check box to enable the primary WLAN.
The fields are enabled.
6. Complete the fields using the information in Basic WLAN Settings Fields on page 202.
7. Click Next.
Chapter 10: Working with Wireless Networks
Configuring Wireless Networks
195