Table of Contents
Advertisement
The My Network page appears.
2. In the OfficeMode network's row, click Edit.
The Edit Network Settings page appears.
3. In the Mode drop-down list, select Enabled.
The fields are enabled.
4. In the IP Address field, type the IP address to use as the OfficeMode network's default gateway.
Note: The OfficeMode network must not overlap other networks.
5. In the Subnet Mask text box, type the OfficeMode internal network range.
6. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 112.
7. If desired, configure DHCP options.
See Configuring DHCP Server Options on page 118.
8. Click Apply.
A warning message appears.
9. Click OK.
A success message appears.
Chapter 6: Managing Your Network
Configuring Network Settings
125
Advertisement
Table of Contents
Troubleshooting
