Nokia IP60 User Manual page 100

Setting Up Dialup Modems
Setting Up a USB Modem
Warning: Before attaching a USB modem, ensure that the total power drawn by all
connected USB devices does not exceed 2.5W per port (0.5A at 5V). If the total
current consumed by a port exceeds 0.5A, a powered USB hub must be used, to
avoid damage to the gateway.
To set up a USB modem
1. Connect a USB-based modem to one of your IP60 appliance's USB ports.
For information on locating the USB ports, see Introduction on page 13.
2. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
3. Next to USB, click Edit.
100 Nokia IP60 Security Appliance User Guide