Nokia IP60 User Manual page 204

Configuring Wireless Networks
In this field... Do this...
Type the passphrase for accessing the network, or click Random to randomly
Passphrase
generate a passphrase.
This must be between 8 and 63 characters. It can contain spaces and
special characters, and is case-sensitive.
For the highest security, choose a long passphrase that is hard to guess, or
use the Random button.
Note: The wireless stations must be configured with this passphrase as well.
Require WPA2 Specify whether you want to require wireless stations to connect using
(802.11i) WPA2, by selecting one of the following:
Enabled. Only wireless stations using WPA2 can access the
wireless network.
Disabled. Wireless stations using either WPA or WPA2 can
access the wireless network. This is the default.
WPA Encryption Select the encryption method to use for authenticating and encrypting
wireless data:
Auto. The IP60 appliance automatically selects the cipher used
by the wireless client. This is the default.
AES. Advanced Encryption Standard
TKIP. Temporal Key Integrity Protocol
Note: AES is more secure than TKIP; however, some devices do not support
AES.
WEP Keys If you selected WEP encryption, you must configure at least one WEP key.
The wireless stations must be configured with the same key, as well.
Key 1, 2, 3, 4 radio Click the radio button next to the WEP key that this gateway should use for
button transmission.
The selected key must be entered in the same key slot (1-4) on the station
devices, but the key need not be selected as the transmit key on the
stations.
Note: You can use all four keys to receive data.
204 Nokia IP60 Security Appliance User Guide