Nokia IP60 User Manual page 300

SmartDefense Categories
The FTP commands listed in the Blocked Commands box will be blocked.
FTP command blocking is enabled by default.
To disable FTP command blocking
In the Action drop-down list, select None.
All FTP commands are allowed, including those in the Blocked Commands box.
To block a specific FTP command
1. In the Allowed Commands box, select the desired FTP command.
2. Click Block.
The FTP command appears in the Blocked Commands box.
3. Click Apply.
When FTP command blocking is enabled, the FTP command will be blocked.
To allow a specific FTP command
1. In the Blocked Commands box, select the desired FTP command.
2. Click Accept.
The FTP command appears in the Allowed Commands box.
3. Click Apply.
The FTP command will be allowed, regardless of whether FTP command blocking is enabled or
disabled.
HTTP
This category allows you to configure various protections related to the HTTP protocol. It includes the
following:
Header Rejection on page 301
Worm Catcher on page 301
300 Nokia IP60 Security Appliance User Guide