Nokia IP60 User Manual page 52

Nokia IP60 and Nokia IP60 Wireless Installation
3. Mark two drill holes on the wall, in accordance with the following sketch:
4. Drill two 3.5 mm diameter holes, approximately 25 mm deep.
5. Insert two plastic conical anchors into the holes.
Note: The conical anchors you received with your Nokia IP60 Edge appliance are
suitable for concrete walls. If you want to mount the appliance on a plaster wall, you
must use anchors that are suitable for plaster walls.
6. Insert the two screws you received with your Nokia IP60 Edge appliance into the plastic
conical anchors, and turn them until they protrude approximately 5 mm from the wall.
7. Align the holes on the Nokia IP60 Edge appliance's underside with the screws on the wall, then
push the appliance in and down.
Your Nokia IP60 Edge appliance is wall mounted. You can now connect it to your computer.
Securing the IP60 Appliance against Theft
The Nokia IP60 Edge appliance features a security slot to the rear of the right panel, which enables you to
secure your appliance against theft, using an anti-theft security device.
Note: Anti-theft security devices are available at most computer hardware stores.
52 Nokia IP60 Security Appliance User Guide