Nokia IP60 User Manual page 354

Setting Up Your Nokia IP60 Appliance as a VPN Server
The VPN Server page appears.
2. Click the Download link.
The VPN-1 SecuRemote for Nokia IP60 page opens in a new window.
3. Follow the online instructions to complete installation.
SecureClient/SecuRemote is installed.
For information on using SecureClient/SecuRemote, see the User Help. To access
SecureClient/SecuRemote User Help, right-click on the VPN Client icon in the taskbar, select Settings,
and then click Help.
Configuring L2TP VPN Clients
If you configured the L2TP VPN Server, you must configure the L2TP VPN Client on all computers that
should be allowed to remotely access your network via L2TP connections.
This procedure is relevant for computers with a Windows XP operating system.
Note: The IP60 appliance supports the following authentication methods:
PAP. For both local users and RADIUS users
EAP-MD5, CHAP. For local users, but not for RADIUS users
To configure L2TP VPN Clients on Microsoft Windows
1. Click Start > Settings > Control Panel.
The Control Panel window appears.
2. Double-click the Network and Dial-up Connections icon.
The Network and Dial-up Connections window appears.
3. Click File > New Connection.
The New Connection Wizard opens displaying the Welcome to the New Connection Wizard screen.
4. Click Next.
354 Nokia IP60 Security Appliance User Guide