Nokia IP60 User Manual page 441

Using Packet Sniffer
The IP60 appliance includes the Packet Sniffer tool, which enables you to capture packets from any internal
network or Nokia IP60 port. This is useful for troubleshooting network problems and for collecting data
about network behavior.
The IP60 appliance saves the captured packets to a file on your computer. You can use a free protocol
analyzer, such as Ethereal or Wireshark, to analyze the file, or you can send it to technical support.
Wireshark runs on all popular computing platforms and can be downloaded from
http://www.wireshark.com.
To use Packet Sniffer
1. Click Setup in the main menu, and click the Tools tab.
The Tools page appears.
2. Click Sniffer.
The Packet Sniffer window opens.
3. Complete the fields using the information in the following table.
4. Click Start.
The Packet Sniffer window displays the name of the interface, the number of packets collected, and the
percentage of storage space remaining on the appliance for storing the packets.
5. Click Stop to stop collecting packets.
A standard File Download dialog box appears.
6. Click Save.
The Save As dialog box appears.
7. Browse to a destination directory of your choice.
Chapter 19: Maintenance
Using Diagnostic Tools
441