Relay Outputs; View Inputs; View Inputs Screen In Diagnostics Menu - Pressura RPM10 Operation And Service Manual


Touch the Output 1, Output 2, Output 3 button to manually set the output signal.
Test – Relay Outputs
Enter the Relay Outputs item in the Diagnostics menu to manually manipulate the relay outputs.
Figure 15. Relay Outputs screen in Diagnostics menu

Touch the Relay 1 Toggle or Relay 2 Toggle button to manually open or close the relay.
Test - View Inputs
Enter the View Inputs item to view all inputs with real-time updates.
The Model RPM10/RPM20 monitor will display "Unconfigured" for any inputs that have not

been configured. Go to the Configure menu to configure these inputs appropriately.
66
Figure 16. View Inputs screen in Diagnostics menu
Part Two