Menu And Menu Items - Pressura RPM10 Operation And Service Manual


Enter the new setpoint of -
0.01300 in H

Touch the Exit button in the Rm1 Alarm menu and again in the main menu to
return to the main running screen.

Menu and Menu Items

The PresSura Model RPM10 and RPM20 monitors are very versatile devices which can be
configured to meet your specific application. This section lists all of the menu items available to
program and change (except diagnostics menu). Changing items is accomplished by using the
touchscreen or through communications with the Building Automation System. If you are
unfamiliar with the keystroke procedure please see
explanation. This section provides the following information:

Complete list of menus and all menu items.

Gives the menu or programming name.

Defines each menu item's function; what it does, how it does it, etc.

Gives the range of values that can be programmed.

Gives default item value (how it shipped from factory).
The menus covered in this section are divided into groups of related items to ease programming.
As an example all set points are in one menu, alarm information in another, etc. The manual
follows the menus as programmed in the controller. The menu items are always grouped by
menu and then listed in menu item order, not alphabetical order.
Figure 11 and Figure 12 show the PresSura Model RPM10 and RPM20 monitor menu items.
12
O. Save the new setting.
2
Software Programming section for a detailed
Part Two