Pressura RPM10 Operation And Service Manual page 26

Configure Menu
MENU ITEM
SOFTWARE
Monitor/
NAME
Controller
Configure INPUT5 Input 5
RPM10 and
RPM20
Configure INPUT6 Input 6
RPM20
Configure INPUT7 Input 7
RPM10 and
RPM20
Number Format Num Format
RPM10 and
RPM20
ITEM DESCRIPTION
The Input 5 item selects the desired input type for Input5.
Go to the Input 5 menu to adjust parameters such as
sensor range associated with Input5.
The Model RPM10 Monitor cannot be set to Relative
Humidity Sensor.
The Input 6 item selects the desired input type for Input6.
Go to the Input 6 menu to adjust parameters such as
sensor range associated with Input6.
The Input 6 item is not functional on the Model RPM10
Monitor. It is only active on the Model RPM20 Monitor.
The Input 7 item selects the desired input type for Input7.
Go to the Input 7 menu to adjust parameters such as
sensor range associated with Input7.
Input 7 can only be set to Room 2 Key Switch if the # of
Rooms item is set to 2 Rooms With Anteroom.
The Model RPM10 Monitor cannot be set to Room 2
Key Switch.
The Num Format menu item selects the way that
numbers are displayed.
ITEM RANGE DEFAULT VALUE
RPM10: None,
Room1 Key Switch
RPM20: None,
Room1 Key Switch,
Relative Humidity
Sensor
None, Room1 Temp
Sensor, Room 2
Occupancy Sensor,
Room 2 Door Switch
RPM10: Exhaust
Pressure Flow,
Exhaust Linear Flow,
Exhaust Venturi
Flow, Exhaust
Switch, None
RPM20: Exhaust
Pressure Flow,
Exhaust Linear Flow,
Exhaust Venturi
Flow, Exhaust
Switch, Room 2
Key Switch, None
Period Period
Comma
None
None
None