Access Codes / Passcode; Access Code Screen; Appendix D - Pressura RPM10 Operation And Service Manual

Appendix D

Access Codes / Passcode

The Model RPM10 and RPM20 Room Monitors may prompt you to enter an access code to
change the room mode or to enter the menu system. The access code screen is shown below in
Error! Reference source not found.. To enter the access code, type in the 4-digit passcode
shown below and press Save.
The PresSura room monitors and controllers feature two levels of passcode access:

To change the room mode, use the passcode 0317.

To access the menu system, use the passcode 2887.
Figure 35. Access Code Screen
107