Pressura RPM10 Operation And Service Manual page 62

Input7 Config Menu
Exh Pres Flow
SOFTWARE
MENU ITEM
NAME
Reset Calibration Reset Cal
RPM10 and
RPM20
ITEM DESCRIPTION
The Reset Cal item is used to return to the factory default
calibration, undoing any field calibration adjustments.
When this menu item is entered, the controller will prompt
the user to verify that they want to do this by displaying the
message "Reset Settings to Factory Default?" Entering
YES resets the Low Cal, High Cal and K-Factor factors
for this sensor to defaults. Entering NO will cancel the
reset.
DEFAULT
ITEM RANGE
VALUE
None N/A
(continued on next page)