Pressura RPM10 Operation And Service Manual page 37

Interface Menu
SOFTWARE
MENU ITEM
NAME
Network Address Address
RPM10 and
RPM20
MAC ID MAC ID
RPM10 and
RPM20
Baud Rate Baud Rate
RPM10 and
RPM20
ITEM DESCRIPTION
The Address item sets the main network address of the
room pressure monitor. Each unit on the network must
have its own unique address.
NOTE: The Address item is only functional when
Comm Type is set to MODBUS or BACNET.
NOTE: Changes to the Address may take up to 1 minute
to take effect when using BACnet
communications.
The MAC ID item combines with the MAC ADDRESS to
form the Device ID. The Device ID is the 3 digits of the
MAC ID*1000 plus the 3 digits of the MAC ADDRESS. For
example, if the MAC ID is 865 and the MAC ADDRESS is
1, then the Device ID is 865001.
NOTE: The MAC ID item is only functional when
Comm Type is set to BACNET.
NOTE: Changes to the MAC ID may take up to 1 minute
to take effect when using BACnet
communications.
The Baud Rate item sets the communication speed of the
PresSura monitor when using Modbus or BACnet
communications.
NOTE: Changes to the Baud Rate may take up to
1 minute to take effect when using BACnet
communications.
Baud Rate is not configurable when Comm Type
is set to Modbus.
DEFAULT
ITEM RANGE
VALUE
1
Modbus: 1 to 247
BACnet: 1 to 127
1 to 999 606
Modbus: 9600 Modbus: 9600
BACnet: 9600, BACnet:
19200, 38400, AutoBaud
76800, AutoBaud