Pressura RPM10 Operation And Service Manual page 25

Configure Menu
MENU ITEM
SOFTWARE
Monitor/
NAME
Controller
Configure INPUT1 Input 1
RPM10 and
RPM20
Configure INPUT2 Input 2
RPM20
Configure INPUT3 Input 3
RPM10 and
RPM20
Configure INPUT4 Input 4
RPM10 and
RPM20
ITEM DESCRIPTION
The Input 1 item selects the desired input type for Input1,
the room pressure sensor for Room 1
Go to the Input 1 menu to adjust parameters such as
sensor range associated with Input1.
The Input 2 item selects the desired input type for Input2,
the room pressure sensor for the AnteRm.
Go to the Input2 menu to adjust parameters such as
sensor range associated with Input2.
The Input 2 item is only active if the # of Rooms item is
set to 1 ROOM WITH ANTEROOM.
The Input 2 item is not functional on the Model RPM10
Monitor. It is only active on the Model RPM20 Monitor.
The Input 3 item selects the desired input type for Input3.
Go to the Input 3 menu to adjust parameters such as
sensor range associated with Input3.
The Model RPM10 Monitor cannot be set to TSI Sensor or
Pressure Transducer.
Input 3 can only be set to TSI Sensor or Pressure
Transduce if the # of Rooms item is set to 2 Rooms with
Anteroom.
The Input 4 item selects the desired input type for Input4.
Go to the Input 4 menu to adjust parameters such as
sensor range associated with Input4.
ITEM RANGE DEFAULT VALUE
TSI Sensor, Pressure TSI Sensor
Transducer
TSI Sensor, Pressure
Transducer, None
RPM10: Supply
Pressure Flow
Supply Linear Flow,
Supply Venturi Flow,
Supply Switch, None
RPM20: Supply
Pressure Flow
Supply Linear Flow,
Supply Venturi Flow,
Supply Switch
TSI Sensor, Pressure
Transducer, None
None,
Room1 Door Switch,
Room 1 Occupancy
Sensor
None
None
None