Diagnostics Menu - Pressura RPM10 Operation And Service Manual

Diagnostics Menu

SOFTWARE
MENU ITEM
NAME
View Measurement View Inputs
Inputs
RPM10 and
RPM20
View Output View Outputs
Signals
RPM10 and
RPM20
Control Relay Relay
Outputs Outputs
RPM10 and
RPM20
Manually Adjust Analog Outpt
Analog Outputs
RPM10 and
RPM20
Recalibrate Touch Cal
Touchscreen
RPM10 and
RPM20
Reset to Default Reset
RPM10 and
RPM20
The View Inputs item allows the user to view the measurements for all 7 inputs on one screen.
The View Outputs item allows the user to view the current output signals, in units of V or mA.
The Relay Outputs item allows the user to view and manually control the 2 relay outputs.
The Analog Outpt item allows the user to manually control the Analog Outputs.
The Touch Cal item starts the touchscreen recalibration process. While recalibrating the touchscreen,
the PresSura monitor will direct the user to touch the screen in various places.
NOTE: Recalibrating the touchscreen is best accomplished using a stylus, pen, or similar object.
The Reset item resets all parameters to factory default.
ITEM DESCRIPTION