Pressura RPM10 Operation And Service Manual page 57

Input4 Config Menu
Rm1 Dr Sw
SOFTWARE
MENU ITEM
NAME
Signal to Indicate Dr Open Sig
Open Door
RPM10 and
RPM20
Input4 Config Menu
Rm1 Occ Sen
SOFTWARE
MENU ITEM
NAME
Room Unoccupied Unocc Sig
Signal
RPM10 and
RPM20
Input5 Config Menu
Rm1 Key Switch
The Model RPM10 or RPM20 will display a message "Nothing to Configure" when Input 5 is set to Rm1 Key Switch and the user enters the
Input5 Config menu.
ITEM DESCRIPTION
The Dr Open Sig item sets the signal the Model RPM10 or
RPM20 Room Pressure Controller will receive to indicate a
door is open.
ITEM DESCRIPTION
The Unocc Sig item is used to set the signal that indicates
the room is unoccupied.
ITEM DESCRIPTION
DEFAULT
ITEM RANGE
VALUE
Open, Closed Closed
DEFAULT
ITEM RANGE
VALUE
Open, Closed Closed