Replacing Maintenance Section; Removing Maintenance Inner Cover - MUTOH ValueJet 1604 Service Manual

VJ-1604 Maintenance Manual

4.9 Replacing Maintenance Section

This section describes the procedure to replace the maintenance section.
4.9.1

Removing Maintenance Inner Cover

1. Remove the maintenance cover U.
"4.2.3 Removing Maintenance Cover U" p.4-10
2. Move the carriage to the opposite side of the origin.
"4.8.1 Releasing Head Lock" p.4-106
3. Remove the screws (4 pieces) that retain the maintenance inside cover.
Front view
1
2
No.
4. Remove the maintenance inside cover.
1 Maintenance inside cover
2 Screws that retain the maintenance inside cover
(pan-head screw with spring washer and flat washer M3
8)
Part name
4-123
4 Parts Replacement
Upper view
×
2
1
Rev.-05