Replacement Of Frame Section Components; Replacing Adsorption Fan - MUTOH ValueJet VJ-1324 Maintenance Manual

3.10 Replacement of Frame Section Components

3.10 Replacement of Frame Section Components
3.10.1

Replacing Adsorption FAN

1. Remove the screws (3 pieces) retaining adsorption FAN mounting plate to B frame, then remove
the adsorption FAN.
No.
×
1 M3 6 S Tight cup
Adsorption FAN mounting plate
2
1. Remove the adsorption FAN Cable connector.
1
3.10.1 Replacing Adsorption FAN
1
Name
No.
1 Cable of Adsorption FAN
Adsorption FAN
2
2. Remove the screws (2 pieces) retaining FAN duct to remove FAN duct.
3. Remove the screws (2 pieces) retaining adsorption FAN.
4. Replace adsorption FAN.
1
3
2
No.
Adsorption FAN Cable connector
1
2 Pan head small screw M4
3 Adsorption Fan Assy
× 40Pan-head screw with spring washer and flat
4 M4
washer polished
5 Fan Duct
6 Pan head small screwM4
5. To reassemble unit, reverse the removal procedure.
VJ1324E-M-02
Name
6
4
5
Name
× 8
× 5
P.3-149