Configuring Remote Control Behavior; Configuring Directory Settings - Polycom V500 Administrator's Manual

Administrator's Guide for the V500 System

Configuring Remote Control Behavior

Configuring Directory Settings

4 - 12
Setting
Recent Calls
Far Site Name
Display Time
You can customize the behavior of the remote control to support the your
environment.
To configure remote control behavior:
1. Go to System > Admin Settings > General Settings > System Settings >
Remote Control.
2. Configure these settings:
Setting
Keypad Audio
Confirmation
Remote Control
Keypad
You can customize the behavior of the Directory on the Directory screen.
To configure system settings:
1. Go to System > Admin Settings > General Settings > System Settings >
Directory.
2. Configure these settings:
Setting
System Name
Allow Directory
Changes
Description
Specifies whether to display the Recent Calls button on the home
screen. The Recent Calls screen lists the site number or name,
the date and time, and whether the call was incoming or outgoing.
NOTE: If the Call Detail Report option is not selected, the Recent
Calls option is not available.
Specifies the time period the far-site name appears on screen
when calls first connect.
Description
Specifies whether to play a voice confirmation of numbers
selected with the remote control.
Specifies whether the camera moves to presets or creates DTMF
tones when the remote control keypad buttons are pressed.
Description
Enter or change the system name in this field. This name appears
on the screen for the far site when you are making calls.
Specifies whether you can save changes you make to the
directory.
www.polycom.com/videodocumentation