5. Securing Information Sent over the Network or Stored on Hard Disk
8.
Enter the number of times that you want to overwrite using the number keys, and then press
the [OK] key.
9.
Select [NSA] using [ ] or [ ], and then press the [OK] key.
10.
Select [DoD] using [ ] or [ ], and then press the [OK] key.
5
11.
Press [Yes].
12.
When overwriting is completed, press [Exit], and then turn off the power.
• Should the main power switch be turned to [Off] before Erase All Memory is completed, overwriting
will continue once the main power switch is turned back to [On].
• If you specify to both overwrite and encrypt the data, the data will all be encrypted.
• If an error occurs before overwriting is completed, turn off the main power. Turn it on again, and then
repeat from step 2.
• p.132 "Methods of Overwriting"
Suspending Erase All Memory
The overwriting process can be suspended temporarily.
138