Installing the Front Kick Plates
Required Parts
Front kick plates:
•
Left, center, and right front kick plates (700-43097-xx center, 700-
43098-xx left, 700-43096-xx right)
• 1x Cardboard spacer no part number, attached to the cable runner
base
•
5x black M4x12mm screw 69-2797-xx
NOTE: Make sure that all cabling between the endpoint structure and the
Page 94
© 2015 Cisco Systems, Inc. All rights reserved.
Installing the Front Kick Plates
front row table is complete before you install the front kick plates.
700-43096-xx
700-43097-xx
700-43098-xx
Required Tools
• #2 Phillips driver