Cisco TelePresence IX5000 Installation Manual page 108

Completing Installation of the First Row Table
1
a. Lower the Mute Button Assembly 74-12200-xx to the mute button hole on the table top assembly.
Route the mute button cable through the openings underneath the tabletop to the mic bar hole.
the Mute Button Assembly with the 2x M4 x 12mm screws 69-2801-xx.
button is flush with top surface of Table Top Assembly.
c. 2x 48-2646
Page 108
© 2015 Cisco Systems, Inc. All rights reserved.
a. 3x 74-12200-xx
d. Adjust the screws so that mute
e. Repeat for each Mute Button Assembly.
Mute button cable - route
b.
through to mic bar hole
b.
c. Secure
d. Mute button flush with
table after installation