Cisco TelePresence IX5000 Installation Manual page 170

Installing the Outer Structure Panels and Trim
1 0
Reach under the fascia and test-fit the 2x bottom trim joints between the lower right and lower left trim
assemblies. Use the trim joint that fits best (narrow 700-47507-xx, medium 700-47506-xx, or wide
700-47505-xx) to match the gap between the trim assemblies. Secure with 2x M4 nuts 69-2793-xx. You can
mix and match the trim joints (for example, wide on one side and narrow on the other side) to accomodate
for varying gaps. You do not need to remove the fascia to attach the trim joints.
Page 170
© 2015 Cisco Systems, Inc. All rights reserved.
Table Top C
(700-42478-01)
2x 700-47507-xx, 700-47506-xx, or
700-47505-xx - choose the one that
fits best between the gaps
(700-42477-01)
Table Top B
(700-42476-01)
2x 69-2793-xx
Table Top A
Fascia removed in this
illustration for clarity