Cisco TelePresence IX5000 Installation Manual page 73

Installing and Cabling the Displays
Required Parts
3x Displays 74-12597-xx
6x Display Z-clips 3x 700-46232-xx and 3x 700-46233-xx
2x Display mounting spools 69-2625-xx
2x Silver M8 threaded studs 69-2625-xx
2x Silver M8 external tooth lock washers 69-2625-xx
2x Display brackets (no part number, included with the displays)
10x M6 display bracket screws (included with the displays)
2x Vertical bezel extrusions 800-41842-xx
10x M4 X 12mm screws 69-2797-xx
6x M4 X 6mm screws, black, 69-2625-xx
Display cabling kit, 69-2678-xx includes the following cables:
• 3x power cord, 3 meter, 37-0833-xx
• 3x HDMI-to-DVI-D patch cord, 3 meter, 37-1387-xx
Installing and Cabling the Displays
Required Tools
• #2 Phillips driver
• #3 Phillips driver
• 13mm wrench or adjustable wrench
• 19mm ratcheting box end wrench
• Spirit or digital level
• Gloves (recommended for display mounting because
the vertical edge of the displays has a sharp edge)
• 6mm T-handle hex driver
Page 73
© 2015 Cisco Systems, Inc. All rights reserved.