Installing the Outer Structure Panels and Trim
9
Perform final alignment of the lower outer panels. While still wearing gloves, pull the corners of the
fascia out and move the lower cabinet(s), if required, to fit with the fascia and the trim pieces connecting
to it. The aluminum trim should look seamless around the perimeter of the system, and any gaps should
be minimal and uniform. The four circled screws with plastic washer should provide adequate movement
without loosening the screws. Tighten the screws and replace the fascia after final adjustment.
Table Top B
(700-42476-01)
Table Top C
(700-42478-01)
Table Top A
(700-42477-01)
© 2015 Cisco Systems, Inc. All rights reserved.
Page 169