Cisco TelePresence IX5000 Installation Manual page 107

Completing Installation of the First Row Table
Completing Installation of the First Row Table
Required Parts
3x mute button 74-12200-xx
3x microphone bars 74-12199-xx
Note: The packaging for the mic bar includes the mic bar and the center cap.
Do not throw the small round caps away with the packaging.
24x M4x12mm screws 69-2801-xx
6x Mini-DisplayPort Cables
Velcro straps 52-0449-xx as needed
2x Presentation cup 800-43264-xx '
8x M3 thumb screws 69-2824-xx
12x M3x12mm screws 69-2815-xx
12x M3 screws 48-0873-xx (part of mute button 800-41388-01)
2x Cable retractor 800-42888-xx
8x M3x12mm screws for cable retractor 48-2091-xx
1x Cable runner retainer 700-44724-xx
6x M6x10mm screws 69-2815-xx
1x Cable runner cover (700-42945-xx for systems without 42-inch auxiliary
displays, 700-47587-xx for systems with auxiliary displays)
Side panel and front panel covers:
• 2x 700-43422-xx – outside of center-left and center-right leg
• 2x 700-43004-xx - inside of the outside legs
• 2x 700-43424-xx – outside of outside table legs
• 2x 700-43423-xx - inside of inside legs
• 1x 700-43425-xx - front (privacy) panel
3x cable mute button covers (1x right 700-44726-xx, 1x left 700-44727-xx, 1x
center 700-45410-xx)
13x M4x10mm black screws 69-2821-xx
Required Tools
• #4 Philips Screw Driver
• 10mm socket or ratcheting wrench
• Flat file or Dremel (for the table leg when installing the
cable retractor)
• White gloves (included with accessory kit)
© 2015 Cisco Systems, Inc. All rights reserved.
Page 107