Cisco TelePresence IX5000 Installation Manual page 76
Hide thumbs
Also See for TelePresence IX5000:
- Manual (44 pages) ,
- First-time setup (40 pages) ,
- User manual (26 pages)
Table of Contents
Advertisement
Installing and Cabling the Displays
3
Insert the spool on the right display.
from the FRONT) of the display using a #3 Phillips driver.
2625-xx) and an M8 stud (part of 69-2625-xx).
(part of 69-2625-xx) on the threaded stud.
between the spool and the rear of the display or you cannot install the display.
69-2625-xx
Page 76
© 2015 Cisco Systems, Inc. All rights reserved.
a.
remove one M8 screw on the lower right side (when viewed
b.
c.
Tighten the stud with a 13mm wrench.
d.
MAKE SURE THAT THERE IS is 1 1/8 inch (29mm) distance
Install a silver M8 lock washer (part of 69-
1 1/8" (29 mm)
d.
Install the spool
Hide quick links:
Advertisement
Table of Contents
