Installing the Outer Structure Panels and Trim
1
Install the center cabinet 800-41092-xx.
and push them together if required.
onto the center horizontal cross bar.
horizontal cross bar.
frame is fully engaged in the slot in the cabinet and the magnets are mated to the frame.
Page 148
© 2015 Cisco Systems, Inc. All rights reserved.
b.
Lift the center cabinet over the frame and lower the cabinet down
c.
Line up the the guide blocks pointing down from the cabinet into the
d.
Reach back behind the center cabinet to make sure the guide pin sticking out of the
Slot (engages with
guide pin)
800-41092-xx
a.
Make sure that there is no space between the displays,
Installed center cabinet (from back of system)
Guide block