Installing the Front Kick Plates
1b
c.
Place the cardboard spacer between the cable runner and the front kick plate and level the front
kick plate using a spirit level. Make sure that the front kick plate is a minimum of 26mm above the
highest point on the floor (either left or right).
the spacer, and recheck the minimum 26mm of clearance.
Page 96
© 2015 Cisco Systems, Inc. All rights reserved.
Cardboard spacer
d.
Tighten the 2x black M4x12mm screws 69-2797-xx, remove
Minimum 26mm (1 inch)