Installing the Outer Structure Panels and Trim
11a
Install the top fascia 74-12905-xx.
accessory kit for this procedure.
camera cutout in the fascia with the camera, and place the top fascia over the camera. Engage the alignment
lip of the fascia to the receiving slots above the center display, and make sure that the magnets connect the
fascia to the frame.
shelf in the display frame that is created by the horizontal cross bars.
b.
Align the top fascia vertically. The upper lip of the top fascia rests in the sheet metal
Table Top C
(700-42478-01)
Use two people and wear the gloves that are included with the
a.
Begin to unfold, but do not fully unfold, the top fascia. Align the
Table Top B
(700-42476-01)
Table Top A
(700-42477-01)
74-12905-xx
© 2015 Cisco Systems, Inc. All rights reserved.
Frame shelf
Page 171