Cisco TelePresence IX5000 Installation Manual page 97

Installing the Front Kick Plates
2a
Attach the front left and right kick plates 700-43098-xx and 700-43096-xx.
side kick plates over the alignment notch in the front center kick plate and connect the hooks in the
side kick plate to the retention slots in the center kick plate. Support the free end until the remaining screws
are installed. b. Using a spirit level, level the outside edge of the front left kick plate (700-43098-xx) with the
front center kick plate.
Note the arrows on the kick plates that show the correct screw placement.
700-43098-xx
4x 49-0420-xx
c. Install and tighten 4x black M4x12mm screws 49-0420-xx (2 for each kick plate).
700-43096-xx
Arrows show correct
screw placement
a. Hook the pin on the
Page 97
© 2015 Cisco Systems, Inc. All rights reserved.