For Spark registred systems, go to: • Cisco TelePresence SX80 https://support.ciscospark.com Guidelines for how to find the documentation on the Cisco The guide describes the API for on-premise registered video web site are included in theUser documentation on the systems (CUCM, VCS) as well as video systems registered Cisco web site appendix.
SerialPort LoginRequired: <Off/On> Cisco Spark registered systems If a video system is registered to Cisco’s cloud service (Cisco Spark), only local users with the INTEGRATOR and ROOMCONTROL user roles are available.
Echo <on/off> Refer to ”Configurations” on page can be used for advanced troubleshooting together with Cisco technical support. Systemtools are not a part of the If echo is set to the key inputs are displayed when enter- programming API. Refer to ”The SystemTools commands”...
Typical situations where the codec does not receive EDID information are: when you connect : Off/On DefaultMode a Cisco TelePresence 60 camera using 3G-SDI; when you connect a Cisco TelePresence 60 Off: Turn off the camera backlight compensation. (Cisco PrecisionHD 1080p4xS2) camera; when you use an HDMI repeater that does not pass on EDID information.
Cameras SpeakerTrack TrackingMode xConfiguration Cameras SpeakerTrack Mode This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera, and when Cameras SpeakerTrack Mode is set to Auto. This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera.
Cameras SpeakerTrack ConnectorDetection Mode xConfiguration Cameras SpeakerTrack ConnectorDetection CameraRight This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected to This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected the codec (video system).
If multiple protocols are available, the order of priority is: 1) SIP; 2) H323; 3) H320. If the Requires user role: ADMIN system cannot register, the auto-selection chooses H323. Default value: Off H320: All calls are set up as H.320 calls (only applicable if connected to Cisco TelePresence ISDN Link). USAGE: xConfiguration Conference AutoAnswer Mute: Mute H323: All calls are set up as H.323 calls.
Define the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN by Agere Systems, Proxim and Avaya. clients without the need for client certificates. Developed by Microsoft, Cisco and RSA Security. Requires user role: ADMIN, USER Requires user role: ADMIN, USER...
: Auto/Manual/Off Mode : Auto/10half/10full/100half/100full/1000full Speed Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. Auto: Autonegotiate link speed. If CDP is not available, VLAN is not enabled. 10half: Force link to 10 Mbps half-duplex.
NetworkServices CDP Mode setting is switched Off, you cannot use the web interface. Enable or disable the CDP (Cisco Discovery Protocol) daemon. Enabling CDP will make the If you need extra security (encryption and decryption of requests, and pages that are returned endpoint report certain statistics and device identifiers to a CDP-enabled switch.
Requires user role: ADMIN in order to receive a response from the SNMP Agent in the codec. The default password is "public". If you have the Cisco TelePresence Management Suite (TMS) you must make sure the Default value: "" same SNMP Community is configured there too. NOTE: The SNMP Community password is case sensitive.
Peripherals Profile TouchPanels Define the number of Cisco Touch controllers that are expected to be connected to the video system. This information is used by the video system's diagnostics service. If the number of connected Touch controllers does not match this setting, the diagnostics service will report it as an inconsistency.
CUCM: The phonebook is located on the Cisco Unified Communications Manager. Spark: The phonebook is located on Spark. TMS: The phonebook is located on the Cisco TelePresence Management Suite server. VCS: The phonebook is located on the Cisco TelePresence Video Communication Server.
Spark: Push configurations to the video system from Spark. TMS: Push configurations to the video system from TMS (Cisco TelePresence Management System). VCS: Push configurations to the video system from VCS (Cisco TelePresence Video Communication Server). Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
Provisioning ExternalManager AlternateAddress xConfiguration Provisioning ExternalManager Path Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager Define the Path to the external manager / provisioning system. This setting is required when (CUCM) and an alternate CUCM is available for redundancy. Define the address of the alternate several management services reside on the same server, i.e.
Requires user role: ADMIN, USER video system. In order to use a client, at least one of the Proximity services must be enabled Default value: Enabled (refer to the Proximity Services settings). In general, Cisco recommends enabling all the Proximity services. USAGE:...
Select which camera to diagnose. xCommand Cameras PresenterTrack ClearPosition This setting applies only when using a Cisco TelePresence SX80 with a Precision 60 camera or SpeakerTrack 60 camera. Clear the stored presenter tracking camera position for the overview image of the stage. The PresenterTrack feature will still work after the camera position has been cleared, but the camera will not view a predefined position upon activation.
Cameras PresenterTrack StorePosition xCommand Cameras PresenterTrack Set This setting applies only when using a Cisco TelePresence SX80 with a Precision 60 camera or This setting applies only when using a Cisco TelePresence SX80 with a Precision 60 camera or SpeakerTrack 60 camera.
Cameras SpeakerTrack Diagnostics Start Tracking: Tracking to Auto (default). where This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera. : On/Off Tracking The SpeakerTrack 60 camera assembly consists of two cameras and uses an audio tracking On: Displays diagnostics from both cameras simultaneously.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER registering to one of them. USAGE: Note: Avoid using FeedbackSlot 3 in an environment where Cisco TelePresence Management Suite (TMS) is used as TMS uses this feedbackslot to register its xCommand Peripherals Connect [HardwareInfo: "HardwareInfo"] ID: "ID" [Name: expressions.
You can add several contact methods to a contact using the xCommand Phonebook where ContactMethod Add command. Note that only the first contact method will appear in the Favorites list on the Cisco TelePresence Touch controller. All contact methods are available in : String (1, 100) MacAddress the API and on the web interface.
You can add several contact methods to a contact. Note that only the first contact method USAGE: will appear in the Favorites list on the Cisco TelePresence Touch controller. The first contact xCommand Phonebook ContactMethod Delete ContactId: "ContactId" ContactMethodId: method may have been created when issuing the xCommand Phonebook Contact Add "ContactMethodId"...
*s Call 5 AnswerState: Answered ** end xStatus Call [n] DeviceType Indicates whether the remote system is a single endpoint or an MCU. Some Cisco endpoints xStatus Call [n] AttendedTransferFrom (SX20, SX80, MX200 G2, MX300 G2) have built-in MCU capabilities.
Shows whether or not the SSL certificate of the server that the video system / codec tries to register to is included in the codec’s trusted CA-list. The server is typically a Cisco VCS or Requires user role: ADMIN, USER CUCM.
SystemUnit Hardware Module CompatibilityLevel Shows whether the system is in standby mode or not. The Cisco TelePresence endpoints are using a NAND flash memory for general storage. The endpoints running TC software are manufactured with a new version of the flash memory.
IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, On our web site you will find an overview of the worldwide Cisco contacts. WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM Go to: http://www.cisco.com/go/offices...