Cisco TelePresence IX5000 Installation Manual page 103

Installing the Front Row Tabletops
4
Install 2x half moon bolt assemblies (51-6068-xx) into slots in the bottom of tabletop assemblies A&B.
Use 10mm open end or ratcheting wrench to tighten the nuts and bring the table sections together.
Make sure the front and back edges are aligned before tightening, and make sure that the half-moon bolt
assemblies are insterted all the way into their recesses in the table.
2x 51-6068-xx
Page 103
© 2015 Cisco Systems, Inc. All rights reserved.