Front Panel Leds - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction Introduction

Front panel LEDs

More information about the codec's physical interface,
including the connector panel and LEDs, are described in
the Physical interface guide.
D15328.01 SX80 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals
Front panel LEDs
Power:
Blinks when the system is starting up.
Steady light when the codec is ready for use.
Pulsates when the codec is in standby.
In Call:
Steady light when in call.
IR:
Not in use.
Alarm:
Lights steady when a serious error occurs.
Maintenance
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
14
Administrator Guide
System settings Appendices