Installing the Camera and Light Panels
5
Install 6x Black M4 X 12mm screws 69-2797-xx into the recessed holes in the speaker covers. Make
sure that the screws thread into the threaded holes behind the covers. Install the 2x screws for the left
display first, then 2x center screws, then 2x right. Note: If the screws do not align with the threaded holes,
DO NOT place a screwdriver or other object into the hole to align them. Raise or lower the displays using the
display levelers from the rear of the system to align the holes.
6X 69-2797-xx
Page 92
© 2015 Cisco Systems, Inc. All rights reserved.
Table Top B
(700-42476-01)
Table Top C
(700-42478-01)
Table Top A
(700-42477-01)