Cisco TelePresence IX5000 Installation Manual page 114

Completing Installation of the First Row Table
6b
Connect the Cisco TelePresence Touch 10 device(s) to the PoE switch in the first row table. Use velcro
cable wraps as needed to secure cables and ensure that the cables are held inside of the structure so
as they are not pinched when the cosmetic panels are installed.
Notes:
- You can install up to six Touch 10 devices (one per participant).
- Route the cables above the switch so that a minimum amount of hot air is blocked around the heatsink.
These fins on the switch are
heatsinks - route cables so air is not
blocked in this area
Page 114
© 2015 Cisco Systems, Inc. All rights reserved.
Table Top C
(700-42478-01)
Touch 10 device
Table Top A
(700-42477-01)
Table Top B
(700-42476-01)
To Touch 10 (1-6 cables depending
on number of Touch 10 devices)
To cable runner and
Host CPU codec