Installing the Lower and Upper Display Frames
12
Make sure that the outside corners of the structure are an equal distance from the wall, then level
the display frames for level and plumb (horizontal and vertical), using 2x Foot A and 2x Foot C. Make
sure that all feet touch the floor after leveling. NOTE: Lean the structure a few degrees toward the wall
(backwards). After you install the displays, the structure will lean slightly forward and bring it back to level.
Make sure that distance from wall is even
Page 20
© 2015 Cisco Systems, Inc. All rights reserved.
Foot B
Foot C
Laser level is aligned with the left
point of the diamond
Foot A