Cisco TelePresence IX5000 Installation Manual page 35

Installing the Codecs, PDUs, and Optional LAN Switches
Installing the Codecs, PDUs, and Optional LAN Switches
Required Parts
Codecs:
• 1x encoder/decoder codec 800-39337-xx
• 1x each encoder/decoder codec mounting brackets 700-43404-
xx left, 700-44771-xx right
• 1x host CPU codec 800-41502-xx
• 1x each host CPU codec mounting brackets 700-43404-xx left,
700-43573-xx right
• 12x black M8x16mm screws with external tooth lock washer 69-
2792-xx
• 16x black M4x12mm screws with external tooth lock washer 69-
2797-xx
Optional LAN Switches:
Note: The switches in the endpoint structure are optional items that
can be used for the Ethernet connectivity modules from the table
legs. You install switches in the table assembly for the Touch 10
device(s) in a later procedure; these are required.
• 2x WS-C2960C-12PC-L switch
• Upper and lower switch brackets (700-43091-xx top), 700-
43090-xx bottom)
• 4x black 10-32x10mm screw with external tooth lock washer
69-100186-xx (part of kit 69-100184-xx and included with the
switch brackets)
• 4x black M4x12 mm screw with external tooth lock washer
69-100185-xx (part of kit 69-100184-xx and included with the
switch brackets)
Required Tools
#2 and #3 Phillips driver
Page 35
© 2015 Cisco Systems, Inc. All rights reserved.