Installing the Outer Structure Panels and Trim
8a
Install the bottom fascia 74-13021-xx.
the accessory kit for this procedure.
and the table structure and move the sides of the bottom fascia towards the table. This procedure aids in
stability while you assemble the bottom fascia, but still allows you to swing the fascia sides back to the
display structure.
Use two people and wear the gloves that are included with
a.
Lay the fascia on the ground between the display structure
a.
View from top of system
74-13021-xx
Page 165
© 2015 Cisco Systems, Inc. All rights reserved.