Installing New Software - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

Installing new software

Convert between Android-based software
and CE software
From Collaboration Software version 8.2 (CE8.2) all DX80 and
DX70 units can run CE software, which is the same software that
runs on the Cisco TelePresence SX and MX Series.
DX80 and DX70 were originally shipped with Android based
software, but are now shipping with CE software.
Before converting to CE software, it is important to carefully
consider the conversion requirements and the functionality
changes compared to Android based software.
The CE software on DX devices does not support the following
features in CE9.1:
• 3 party app installation
rd
• Keyboard control, keyboard and mouse redirect
Refer to the Software Release Notes for further information.
Find a detailed description about how to convert from Android-
based software and CE software, and vice versa, in the Cisco
Webex DX70 and DX80 Convert between CE and Android based
software guide available under Install and Upgrade Guides
► https://www.cisco.com/go/desk-docs
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals
(page 1 of 3)
at
Maintenance Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
61
Administrator Guide
Device settings Appendices