Table 6.27 Messages In The [Selecting Remcs Center] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
Message code
RMG_0019
Settings of detail environment frame display
completed.
RMG_0021 Failed to register REMCS environment data.(xxx)
RMG_0022 Registration of REMCS environment data completed. None.
RMG_0023 REMCS environment data registration completed.
RMG_0036
Required entry.
RMG_0037
Execute registration of REMCS environment data.
Are you sure?
RMG_0189
All events are not sent to the REMCS Center until
environment setting is completed .\nAre you sure?

TABLE 6.27 Messages in the [Selecting REMCS Center] window

Message code
RMG_0002 Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
RMG_0004
RMG_0018 Failed to get registration data. (xxx)
RMG_0027 Failed to change Machine status.
RMG_0097 Failed to read connection point list file. (xxx)
RMG_0098
Select REMCS Center frame display completed.
RMG_0099
Failed to change the REMCS Center. (xxx)
RMG_0100
The Connected REMCS Center change completed.
RMG_0101 Change the REMCS Center address completed.
RMG_0102
Change the REMCS Center address. \nExecute
registration again.
RMG_0103
Change the REMCS Center address. Are you sure?
RMG_0150 Failed to read setting file. (xxx)
Message
Message
74
Action
None.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Enter a valid value.
Click the [OK] or [Cancel]
button.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
Perform registration.
Click the [OK] or [Cancel]
button.
If the error still occurs when you
retry the operation, exit and
C122-E120-06EN