Setting Up The Environment; Figure 3.3 [Selecting Remcs Center] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 3 REMCS Service Start Procedure
The REMCS Center you connect to differs according to the installation country. The initial value for Japan is usually
[OSC]. Thus, simply confirm the value in this window.
If you have already confirmed the value, this window does not appear.

FIGURE 3.3 [Selecting REMCS Center] window

1. Click the [Next] button.
The REMCS Center to connect to is registered. Then, the [Initial Settings] window for setting up the
environment appears.
3.2.3

Setting up the environment

Set up the environment from
selected in 2.2 Connection Configuration for Connecting to the REMCS
You can also set up the environment by importing the setting information (environment information such as the
SMTP server address and sender e-mail address as well as customer information such as the customer name and
administrator's e-mail address) of another machine or the setting information that was backed up and saved in your
machine.
After setting the REMCS service, you can still change the connection type by clicking [Initial Settings] from the
menu in the window shown in
FIGURE 3.4 [Initial Settings]
FIGURE 4.1 [REMCS initial]
15
window.Specify the connection configuration you
Center.
window.
C122-E120-06EN