Temporary Disconnection; Figure 4.15 [Result Of Connection Check] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 4 REMCS Service Operations

FIGURE 4.15 [Result of connection check] window

The e-mail addresses displayed in the [Connection check] window as the receivers of the connection results receive
an e-mail notification of the completed connection check.
4.2.11

Temporary Disconnection

Use this menu item to temporarily disconnect from the REMCS Center.
- It disconnects the server from the REMCS Center when the server is stopped for maintenance or holidays
and cannot establish periodic connections.
- While being disconnected from the REMCS Center, the system does not communicate with the REMCS
Center at all.
- To restart the system operation after being disconnected from the REMCS Center, you need to perform
[Reconnection].
1. From the menu in the window shown in
Disconnection].
The window shown in
2. Click the [Disconnect] button.
A confirmation dialog box appears and a notification of the temporary disconnection is sent to the REMCS
Center.
After processing completes, a pop-up window appears with the results. Then, the window shown in
4.1 [REMCS initial] window
FIGURE 4.1 [REMCS initial]
FIGURE 4.16 [Temporary Disconnection] window
appears.
44
window, click [Temporary
appears.
C122-E120-06EN
FIGURE