Table 6.19 Messages In The [Exportation Of The Remcs Settings] Window; Table 6.20 Messages In The [Connection Check] Window Or [Connection Check Information] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages

TABLE 6.19 Messages in the [Exportation of the REMCS settings] window

Message code
Failed to make frame screen data. (xxx)
RMG_0002
RMG_0004
Invalid CGI parameter specified.
RMG_0015 Invalid entry.
Invalid directory name specified.
RMG_0033
RMG_0036 Required entry.
RMG_0120 The frame display of the exportation of the
environment information and the customer
information has completed.
RMG_0121 Failed to export the environment information.(xxx)
RMG_0122 Failed to export the customer information.(xxx)
RMG_0123 Exportation of the environment information has been
completed.
RMG_0124 Exportation of the customer information has been
completed.
RMG_0125 Export customer information to a file.
RMG_0126 Export the environment information to a file.
- Close this screen after you finish export.

TABLE 6.20 Messages in the [Connection check] window or [Connection check information] window

Message code
RMG_0001 Failed to get Machine status. (xxx)
RMG_0002 Failed to make frame screen data. (xxx)
RMG_0004 Invalid CGI parameter specified.
RMG_0015
Invalid entry.
RMG_0041 Failed to setting Machine status.(xxx)
Message
Message
70
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Enter a valid directory.
Enter data for the item.
None.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
Click the [OK] or [Cancel]
button.
Close the screen after finishing
export.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Correct the entered value.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
C122-E120-06EN