Table 6.26 Messages In The [Environment Settings] Window; Table 6.27 Messages In The [Selecting Remcs Center] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0009
Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0015
RMG_0016
RMG_0018
RMG_0019
RMG_0021
RMG_0022
RMG_0023
RMG_0036
RMG_0037
RMG_0189
Message code
RMG_0002
RMG_0004
RMG_0018
RMG_0027
RMG_0097
RMG_0098
RMG_0099
RMG_0100
RMG_0101
RMG_0102
RMG_0103
RMG_0150
RMG_0172
FE initial frame display completed.

TABLE 6.26 Messages in the [Environment settings] window

Failed to get Machine status.(xxx)
\n(MachineID=xxxxxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Invalid entry.
Input value is out of range.
Failed to get registration data.(xxx)
Settings of detail environment frame display
completed.
Failed to register REMCS environment
data.(xxx)
Registration of REMCS environment data
completed. None.
REMCS environment data registration
completed.
Required entry. Enter a valid value.
Execute registration of REMCS environment
data. Are you sure?
All events are not sent to the REMCS Center
until environment setting is completed . Are
you sure?

TABLE 6.27 Messages in the [Selecting REMCS Center] window

Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to get registration data. (xxx)
Failed to change Machine status.
Failed to read connection point list file. (xxx)
Select REMCS Center frame display
completed. None.
Failed to change the REMCS Center. (xxx)
The Connected REMCS Center change
completed. None.
Change the REMCS Center address
completed.
Change the REMCS Center address. Execute
registration again.
Change the REMCS Center address. Are you
sure?
Failed to read setting file. (xxx)
Failed to get Destination information. (xxx)
Message
Message
62
None.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Correct the entered value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Enter a valid value.
Click the [OK] or [Cancel]
button.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Perform registration.
Click the [OK] or [Cancel]
button.
If the error still occurs when
you retry the operation, exit
CA92344-0542-02