PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 4 REMCS Service Operations
FIGURE 4.16 [Temporary Disconnection] window
4.2.12
Reconnection
Use this menu item to re-establish the connection with the REMCS Center after a temporary disconnection.
If the server operating status has been shown as [DISCONNECT], it becomes [ACTIVE].
1. If the status has been in [MAINTAIN/DISCONNECT], it becomes [MAINTAIN].
From the menu in the window shown in
display the window shown in
2. Click the [Reconnect] button.
A confirmation dialog box appears. Send the notification of reconnection to the REMCS Center.
After processing completes, a pop-up window appears with the results. Then, the window shown in
4.1 [REMCS initial] window
FIGURE 4.17 [Reconnection] window
FIGURE 4.1 [REMCS initial]
FIGURE 4.17 [Reconnection]
appears.
45
window, click [Reconnection] to
window.
FIGURE
C122-E120-06EN