Table 6.8 Messages In The [Initial Settings] Window; Table 6.9 Messages In The [Importation Of The Remcs Settings] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages

TABLE 6.8 Messages in the [Initial Settings] window

Message code
RMG_0001 Failed to get Machine status. (xxx)
RMG_0002 Failed to make frame screen data. (xxx)
RMG_0004 Invalid CGI parameter specified.
RMG_0006 Failed to get connect mode. (xxx)
RMG_0011 Initial Settings frame display completed.
RMG_0025 Failed to set connection mode. (xxx)
RMG_0026 Changed connection mode to xxx.
RMG_0027 Failed to change Machine status. (xxx)

TABLE 6.9 Messages in the [Importation of the REMCS settings] window

Message code
RMG_0002 Failed to make frame screen data. (xxx)
RMG_0004 Invalid CGI parameter specified.
RMG_0015 Invalid entry.
RMG_0027 Failed to change Machine status. (xxx)
RMG_0032 The specified file can not be imported.
RMG_0033 Invalid directory name specified.
Message
Message
61
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Correct the entered value.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Specify a valid file.
Specify a valid directory name.
C122-E120-06EN