Table 6.34 Messages In The [Replacement To The Previous Certificate] Window; Table 6.35 Messages In The [Display Of Certificate] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
Message code
RMG_0217
The frame display of confirmation of the certificate
has been completed.
RMG_0218
Failed to replace the certificate. Try to replace the
certificate again. (xxx)
RMG_0219
Replacing the certificate has been completed.

TABLE 6.34 Messages in the [Replacement to the previous certificate] window

Message code
RMG_0001 Failed to get Machine status.(xxx)
RMG_0002 Failed to make frame screen data. (xxx)
RMG_0004
Invalid CGI parameter specified.
RMG_0041 Failed to setting Machine status.(xxx)
RMG_0216
The certificates will be replaced. Once the
replacement of certificates proceeds, the report to the
REMCS center will not be done until connected
confirmation is completed. Are you sure?
RMG_0220 The frame display of the previous certificate
restoration has been completed.
RMG_0221 Failed to restore to the previous certificate. (xxx)
RMG_0222 The restoration to the previous certificate has been
completed.

TABLE 6.35 Messages in the [Display of certificate] window

Message code
Failed to make frame screen data. (xxx)
RMG_0002
Invalid CGI parameter specified.
RMG_0004
Message
Message
Message
78
Action
None.
Replace the certificate again. If
the problem is not solved, contact
the support center.
None.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Click the [OK] or [Cancel]
button.
None.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
C122-E120-06EN