Table 5.2 Items In The [Environment Settings] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 5 REMCS Service Detail Settings

TABLE 5.2 Items in the [Environment settings] window

Input item
E-Mail settings: Timeout 4
E-Mail settings: Retry
Count
E-Mail settings: Retry
interval
PORT No.
POP (POP Before SMTP)
settings: authentication
timeout
POP (POP Before SMTP)
settings: wait time after
POP authentication
PORT No.
1. From the initial window menu of the FE operation, select [Detail environment settings].
Depending on the current setting conditions,
authentication) window
authentication) window
2. Click the [Setting] button.
When a confirmation dialog box appears, register the setting.
After the processing , the result is displayed in a pop-up window, and the initial window is displayed again.
Maximum Input
number of
digits
Required
2 Required
3 Required
5 Required
4 Required
4 Required
5 Required
FIGURE 5.2 [Environment settings] (POP Before SMTP
or FIGURE 5.3 [Environment settings] (other than POP Before SMTP
appears.
Description
Enter the timeout trigger for E-Mail (seconds)
in single-byte numeric characters.
Range: 60 to 3600
Enter the retry count for E-Mail in single-byte
numeric characters.
Enter the retry interval for E-Mail in single-
byte numeric characters.
Range: 1 to 600
Enter the port number of the SMTP server in
single-byte numeric characters.
Initial value: 25 (Well Known Port is used.)
Range: 1 to 65535
Enter the timeout trigger for POP3
authentication (seconds) in single-byte
numeric characters.
Range: 60 to 3600
Enter the wait time from POP3 authentication
to the start of mail sending (milliseconds) in
single-byte numeric characters.
Recommended value: 1000 ms
Range: 0 to 30000
Enter the port number of the POP3
authentication server in single-byte numeric
characters.
Initial value: 110 (Well Known Port is used.)
Range: 1 to 65535
52 C122-E120-06EN